LeafNut

Product Description

The BranchNode links directly to the electronic ballast within the lantern and is in wireless communication with up to 256 LeafNodes in a 1km radius in an urban environment.

It mounts on to the lantern through a 20mm fixing hole (the same size as used for a mini photo cell) and has a neoprene seal around the base to provide adequate protection against water ingress.

• WiMAC 868MHz compatible communications.
• Can be retrofit into existing lanterns.
• Plug in connection.
• Made in the UK.

Frequency compatibility of 434MHz and 915MHz also available.

Product Description

The power supply unit can be connected to a mains supply up to 1m from the BranchNode.

Warning: Output is not isolated from mains supply. Use only with LeafNut Branchnode.

Product Description

Miniature wireless radio control for street lighting.

The LeafNode is powered directly from the LeafNut enabled ballast in the lantern and communicates wirelessly with a BranchNode control unit.

It send data generated by the ballast back to the BranchNode which sends it to the Trunk.

• WiMAC 868MHz compatible communications.
• Can be retrofit into existing lanterns.
• Plug in connection.
• Made in the UK

Frequency compatibility of 434MHz and 915MHz also available.

Product Description

Miniature wireless radio control for street lighting.

• WiMAC 868MHz compatible communications.
• Can be retrofit into existing lanterns.
• Plug in connection.
• Made in the UK.
• Integral and Remote versions.

Frequency compatibility of 434MHz and 915MHz also available.

Product Description

Miniature wireless radio control for street lighting.

• WiMAC 868MHz compatible communications.
• Can be retrofit into existing lanterns.
• Plug in connection.
• Made in the UK.

Frequency compatibility of 434MHz and 915MHz also available.

Product Description

The PartNight range of HID ballasts are used in conjunction with a photocell to offer a stand alone and instant dimming solution for street and road lighting applications.

The Standard PartNight ballast (PN1) will switch on at full power and dim to a preset level at midnight, then after 6 hours will switch back to full power.

PartNight ballast are also available in other dimming profiles:

• Dims to 50% lumen output at 10.30pm
• Dims to 75% power output at midnight to 5am
• Dims to 75% lumen output at midnight to 6am
• Dims to 50% lumen output at 10pm to 5.30am

Partnight ballasts are WiMAC compatible so it's easy to install LeafNut, at any time, and make further carbon reductions and energy savings.

Product Description

The SmartNight ballast is a stand alone HID ballast designed for street and road lighting applications which only have one switched supply available to the lantern i.e. no photocell.

The ballast will switch on at full power and dim 50% light output at a pre-determind time.

Smartnight ballasts are WiMAC compatible so it's easy to install LeafNut, at any time, and make further carbon reductions and energy savings.

Product Description

Reliable - Specifically designed to ensure the circuit is protected within a robust shell. This ensures the ballast is fully protected to maintain reliability in the most extreme outdoor conditions.

Efficient - Hi efficiency circuit - over 87% efficiency.

Quick Start - Flying leads / mains input connections rapid assembly.

Plus - 4kV surge suppression protects against transients and voltage spikes. PartNight/SmartNight version in development

Product DescriptionProduct Description

Reliable - Specifically designed to ensure the circuit is protected within a robust shell. This ensures the ballast is fully protected to maintain reliability in the most extreme outdoor conditions.

Efficient - Hi efficiency circuit - over 90% efficiency.

Quick Start - Flying leads / mains input connections rapid assembly.

Plus - 4kV surge suppression protects against transients and voltage spikes. SmartNight version in development

Product Description

The NodeSniffer is a handheld device that enables the installing engineer to remotely check the operation of a LeafNode by standing underneath or in close proximity to a Lantern or Traffic sign.

The device obtains the LeafNode serial number, type and version, allowing remote testing by means of switching the Lantern on and off.

Designed for all weather conditions, the SnodeSniffer is encased in a rugged rubber protective jacket.

Frequency compatibility of 435MHz and 915MHz also avaliable.