HID Outdoor

The HPIDD range of HID ballasts for Outdoor use are extensively used in street lighting applications.

The aluminium case provides a robust enclosure protecting the electronics and ensures excellent thermal management extending product life.

4kV surge suppression protects against transients and voltage spikes and the ballast can be operated up to 25m away from the lamp.

The 'Remote' version comes with a screwless cable clamp speeding up assembly time.

Typical Lamp Types

• SON
• CDO
• CPO
• CMH
• SDW-T
• ColorArc
• Cosmo

The SwitchedDim range of ballasts are a stand alone HID ballast designed for street, road lighting and indoor applications. This ballast is used in conjunction with an external switching device such as a time clock switch, motion sensor or switched wire.

The ballast switches on at full power and dims to a predetermined level when the switched supply is absent, when the switched supply is present, the ballast will ramp-up to 100% output.

Remote and integral mounting versions available.

Typical Lamp Types

• SON
• CDO
• CPO
• HPS

DALI dimmable HID ballasts offer a high power intelligent dimming solution for outdoor lighting.

Long Life - The aluminum case provides a robust enclosure protecting the electronics and ensures excellent thermal management extending product life.

Dimming Capabilities - DALI dimming support from 100% to 60% output power and the ability to turn completely off.

Individual and Group Control - Ability to control individual luminaries and simultaneous control of all or specified groups.

4KV surge suppression protects against transients and voltage spikes and the ballast can be operated up to 25m away from the lamp.

The SmartNight range of ballasts are a stand alone dimmable HID ballast designed for street and road lighting applications which only have one switched supply available to the lantern i.e. no Photocell. The ballast will switch on at full power and dim to a preset level at Midnight (or other factory set time) and if the ballast is still switched on after 6 hours will switch back to full power until switched off. Nonvolatile memory allows the calculation of midnight.

The SmartNight LeafNut ballast incorporates all of the features that SmartNight has to offer with the added benefit of being LeafNut enabled. This provides the end user with an instant dimming solution when budgets are not sufficient to provide a full CMS. When budgets permit and with the addition of a LeafNode, this ballast can provide a full street lighting CMS.

Benefits

• Future Proof Installation.
• Instant dimming solution with the ability to install LeafNodes later.
• Factory set dimming profiles, typically 50% or 75%.

Typical Lamp Types

• SON
• CDO
• CMH
• HCI
• Quartz

The LeafNut ballast incorporates all of the features to provide the end user with an instant full CMS. Click here for more information about LeafNut CMS.

Benefits

• A total control system for street lighting which provides monitoring, switching and dimming control of each individual street light.
• No access to lantern is required to change profile.
• User editable dimming profiles - Remotely.

Typical Lamp Types

• SON
• CDM
• HCI
• CMH
• SDW-T
• ColorArc

Click here for the full LeafNut product range.

A high efficiency electronic ballast incorporating rapid assembly plug and socket connections to aid installation on site.

• Simple and rapid connection to mains and luminaire.
• Low ignition voltage <2.5kV means compatability with standard Wieland type connectors.
• Available in 120V on request.
• Surge protection up to 4kV.
• Strain relief: Lockclip01.

The 250W ballast applications include high mast, motorway and streetlighting across the globe. This is a Class II product, dimmable and with full CMS control.

Benefits

Extended Product Life / Reliability - The Polycarbonate case provides a robust enclosure that protects the electronics. This ensures excellent thermal management, which along with a simplistic component count ensures unrivalled reliability and extended product life.

Efficient - More efficient than other leading manufacturers' equivalent ballasts (typically min. 1% higher)

Future Proof - Fully compatible with WiMAC so it's easy to switch to LeafNut CMS at any time.

• c.50% lighter than the equivalent iron core conventional gear.
• No Earth connection required.
• 4kV surge suppression protects against transients and voltage spikes.
• Ballast can be operated up to 25m away.

The CoolPower CPE is the latest electronic ballast in our extensive range for HID outdoor lamps.

Compatability - Increased to ensure usability within a wide industry footprint.

High Efficiency - High power factor (>95) and increased efficiency.

Long Life - The aluminium case provides a robust enclosure protecting the electronics and ensures excellent thermal management extending product life.

Quick Assembly - Screw-less spring clamp ensure easy and rapid set up.

Outdoor Protection - Conformal coating ensures the ballast is protected against outdoor conditions.